Worth: [price_with_discount]
(as of [price_update_date] – Particulars)
[ad_1]
Overview
This can be a normal LCD show Module, IPS display, 2inch diagonal, 240×320 decision, with embedded controller, speaking through SPI interface. As a 2inch IPS show module with a decision of 240 * 320, it makes use of an SPI interface for communication. The LCD has an inside controller with primary features, which can be utilized to attract factors, strains, circles, and rectangles, and show English, Chinese language in addition to footage. We offer full supporting Raspberry Pi demos (BCM2835 library, WiringPi library, and python demos), STM32 demos, and Arduino demos.
Specs
Working voltage: 3.3V/5V (Please be sure that the ability provide voltage and logic voltage are constant, in any other case it won’t work correctly)
Interface: SPI
LCD kind: IPS
Driver: ST7789V
Decision: 240(V) x 320 (H) RGB
Show dimension: 30.60（H）x 40.80（V）mm
Pixel dimension: 0.0975（H）x 0.0975（V）mm
Dimension: 58 x 35 (mm)
Interface
VCC—Energy (3.3V/5V enter)
GND—Floor
DIN—SPI information enter
CLK—SPI clock enter
CS—Chip choice, low energetic
DC—Information/Command choice (excessive for information, low for command)
RST—Reset, low energetic
BL—Backlight
LCD / Controller
The LCD helps 12-bit, 16-bit, and 18-bit enter shade codecs per pixel, specifically RGB444, RGB565, and RGB666 three shade codecs, this demo makes use of RGB565 shade format, which can also be a generally used RGB format. For many LCD controllers, the communication mode of the controller might be configured, often with an 8080 parallel interface, three-wire SPI, four-wire SPI, and different communication strategies. This LCD makes use of a four-wire SPI communication interface, which may vastly save the GPIO port, and the communication velocity will probably be quicker.
On-line Doc/Person Guide: //bit.ly/3TiYx7e
Bundle Content material
2inch LCD Module x1
PH2.0 20cm x1
Working voltage: 3.3V/5V (Please be sure that the ability provide voltage and logic voltage are constant, in any other case it won’t work correctly).
Show shade: RGB, 262K shade.Backlight: LED
Interface: SPI. LCD kind: IPS. Driver: ST7789V. Decision: 240(V) x 320 (H) RGB.
Show dimension: 30.60（H）x 40.80（V）mm. Pixel dimension: 0.0975（H）x 0.0975（V）mm. Dimension: 58 x 35 (mm).
[ad_2]
