[ad_1]
Webinars and occasions within the 3D printing trade are selecting again up this week! Sea-Air-House is coming to Maryland, and SAE Worldwide is sponsoring a 3D Methods webinar about 3D printing in transportation. APS Conferences are happening in France, the Superior Factories Expo involves Barcelona, Stratasys continues its superior coaching programs, and extra. Learn on for all the small print!
3D Printing Information Unpeeled
Our Government Editor Joris Peels, who’s additionally the Vice President of Consulting at Additive Manufacturing Analysis (AMR), gives a information livestream one to 2 instances every week referred to as 3D Printing Information Unpeeled at 9:30 am EST. For every episode, Peels will get on LinkedIn Dwell and tells us, in 20 minutes or much less, what he considers to be the highest information tales from the 3D printing trade that week, and why they’re vital. A few of the tales in his roundup are ones we’ve coated at 3DPrint.com, and a few aren’t, however they’re all equally attention-grabbing and impactful!
April 8 – 10: Sea-Air-House
The Sea-Air-House Exposition, powered by the U.S. Navy League, is the nation’s premiere maritime occasion, welcoming army decision-makers and protection trade leaders to Maryland from April 8-10 to debate the most recent updates within the maritime sector. 16,000 attendees are anticipated, and there might be 4 exhibit experiences, together with a STEM Expo, 57 worldwide delegations, networking alternatives, and rather more. There might be 430 exhibitors at this 12 months’s Sea-Air-House, together with acquainted names like Airbus, Markforged, Boeing, ADDMAN, Snowbird Applied sciences, GE Aerospace, the Workplace of Naval Analysis, and lots of extra.
“With top-tier audio system and occasions highlighting every of the three days, Sea-Air-House is a should attend for anyone invested in the way forward for U.S. maritime superiority.”
You may study extra about Sea-Air-House 2024 right here.
April 8: MatterHackers Completely satisfied Hour with Constructing Momentum
The primary evening of Sea-Air-House, MatterHackers and Constructing Momentum are co-hosting a networking pleased hour occasion simply quarter-hour away, on the Backyard Alexandria in Virginia. Nonetheless, you don’t need to registered for the exposition to attend the pleased hour! Constructing Momentum, a coaching group centered on electronics, drones, coding, 3D printing, and extra, can be situated in Alexandria, and its facility has occasion areas, coaching areas for youths and adults, workshops, and extra. The Phillips Additive Hybrid steel 3D printing and CNC gadget, which the group examined for the US Navy, can be onsite, together with a number of different attention-grabbing manufacturing machines.
“Come and meet with people from the group who’re additionally doing additive manufacturing within the DoD. Or come and simply discover ways to become involved. Occasion isn’t just for DoD and is open to all within the space.”
You may get a ticket to the pleased hour right here.
April 9: Superior Manufacturing Know-how Day
This Tuesday, April ninth, 3D printer reseller 3DOLOGiE is becoming a member of with 3D measurement expertise chief Creaform to carry Superior Manufacturing Know-how Day from 10 am till 6 pm CDT in Cellular, Alabama at Innovation Portal, a nonprofit incubator and innovation hub. The day will start with a drop-in workforce improvement session, adopted by knowledgeable luncheon. After lunch, a drop-in enterprise professionals session will happen, and the occasion will shut with a cheerful hour.
“Community with Additive Manufacturing and Metrology specialists, Innovation Portal startups, native companies, and study trade developments.”
You should buy tickets for the occasion right here.
April 9: 3D Printing for Transportation
When you’re curious in regards to the newest developments in 3D printing for transportation purposes, be a part of 3D Methods at 11 am EST on the ninth for a “Tech Replace: 3D Printing for Transportation in 2024,” sponsored by SAE Worldwide. The dialogue might be moderated by Amanda Hosey, Editor, SAE Media Group. Attendees will study related purposes, like floor texturing and eggshell molding for silicon components, in addition to the affect of 3D printing on transportation OEMs and tiered suppliers, particular materials take a look at knowledge for transportation producers, and extra. After the technical presentation by Richard Broad, Product Supervisor Supplies, 3D Methods, there might be an viewers Q&A session.
“As we speak, OEMs and tiered suppliers face rising stress to swiftly introduce improvements in highway and rail. With the proliferation of applied sciences and suppliers in additive manufacturing (3D printing), acquiring an summary of the most recent developments poses challenges for designers, engineering heads, operations, and additive manufacturing professionals.”
You may register for this tech replace right here.
April 9 – 10: APS Conferences
The twelfth version of APS Conferences by Superior Prototyping Options might be held in Lyon, France from April 9-10. This enterprise conference is devoted to additive manufacturing, speedy prototyping, 3D printing, and product improvement, and offers suppliers the prospect to fulfill with contractors from a wide range of industries, together with medical, aerospace, automotive, rail, protection, and extra. Final 12 months, over 160 firms participated in these conferences, which have a singular format based mostly on B2B conferences. A number of acquainted names from the AM sector might be exhibiting at APS Conferences, together with BigRep, Erpro Group, Materialise, Nikon SLM Options, PostProcess Applied sciences, and extra.
“With its distinctive idea based mostly on pre-selected and pre-planned 40 minutes BtoB conferences, APS Conferences is probably the most environment friendly method for companies to community and interact cooperation: from gear acquisition to R&D and Engineering companies, by additive manufacturing and prototyping sub-contracting companies, together with uncooked materials provide.”
You may register for the APS Conferences right here.
April 9 – 11: Stratasys Continues Superior Coaching
Stratasys continues its superior coaching programs this week, with choices in each its U.S. and EMEA places. First, from April 9/11, “P3 Superior Operations” for Origin One clients might be held on the firm’s North American subsidiary headquarters in Minnesota, adopted by “SAF Superior Operations Coaching” for Stratasys H350 customers from April 10-11, additionally in Minnesota. The ultimate course providing this week, “PolyJet Superior Operations Coaching,” might be from April 9/11 on the firm’s German headquarters.
“Try the most recent class schedule for all of our 3D printing platforms!”
These programs might be provided at each places on future dates, so keep watch over the Stratasys coaching web page.
April 9 – 11: Superior Factories in Barcelona
In Barcelona, additionally from April 9/11, the Superior Factories Expo & Congress might be held. This worldwide commerce present about industrial innovation and Trade 4.0 showcases the most recent options in robotics, IoT, cybersecurity, synthetic intelligence (AI), industrial software program, machine studying, automation methods, additive manufacturing, and extra. There might be a number of particular actions on the occasion, such because the Trade Startup Discussion board, guided Tech Excursions, and the Automotive Innovation Nook, along with the exhibition corridor. A number of AM trade firms that might be exhibiting on the occasion embody HP 3D Printing, 3DZ, Meltio, and Sicnova.
“Discover out the most recent advances and cutting-edge expertise that can rework factories into digital factories because of the usage of superior expertise. Encourage your self with the most recent innovation and discover ways to optimize your enterprise.”
You should buy a move to Superior Factories right here.
April 9 – 12: ceramitec 2024
At Messe München in Germany from April 9-12, you may study all about ceramics on the ceramitec 2024 commerce honest, which covers the trade’s total spectrum. Attendees can uncover the most recent developments, merchandise, and applied sciences on the present, all whereas making vital contacts that would result in new enterprise. Featured exhibition areas at ceramitec embody positive and refractory ceramics, heavy clay, uncooked supplies, powder metallurgy, and technical ceramics. You’ll additionally acknowledge some AM trade firms on the exhibition flooring, together with Lithoz, 3DCeram, Desktop Metallic, and CONCR3DE Printing.
“In these risky instances, ceramitec gives market orientation and serves as a pattern barometer. In mild of the numerous challenges at the moment going through the ceramics trade, ceramitec exhibitors will current the options which are urgently wanted. Whether or not decarbonization, digitalization, power effectivity or inexperienced applied sciences – ceramitec gives the appropriate solutions to all present developments.”
You should buy a ticket to ceramitec 2024 right here.
April 10: AddUp’s DED Expertise Day
AddUp is holding a DED Expertise Day in Augsburg, Germany this Wednesday, April tenth, along with co-host MT Aerospace AG and assist from Siemens. Attendees will get to increase their data of directed power deposition (DED) expertise by keynotes, workshops, industrial use instances, and data sharing with different trade specialists and thought leaders. There will even be a networking lunch, an MT Aerospace manufacturing unit tour, and a remaining session with drinks and shutting notes.
“Broaden your data of DED alongside thought leaders, trade specialists, and discover real-world purposes that can reshape your perspective.”
You may study extra right here.
Could 8 – 10: AM Coalition’s Second Annual DC Fly-In
Whereas the second annual Additive Manufacturing Coalition DC Fly-In isn’t till Could 8-10, discounted charges on the block of rooms on the historic Resort Washington finish this Wednesday the tenth. Most of the actions throughout this three-day occasion will happen on the resort, or close by, so it’s an important place to remain in the event you’re planning on taking part. This occasion, which counts RICOH as a platinum sponsor, is a good likelihood to advocate on Capitol Hill in assist of AM.
“Be a part of us for a really particular alternative to return to DC to fulfill with public coverage leaders in Congress and the Federal Businesses to debate additive manufacturing and the significance of sturdy public insurance policies to advance the utilization of AM for each our Nationwide financial system and our Nationwide Protection.”
You should buy tickets for AM Coalition’s second annual DC Fly-In right here. Don’t delay, charges go up on Friday, April twenty sixth!
April 10: Metallic Binder Jetting with Markforged & Azoth
Additionally on the tenth, you received’t need to miss the webinar on “Metallic Binder Jetting Course of and Functions with Markforged Buyer Azoth,” which takes place at 11 am EST. Ross Adams, Binder Jetting Supervisor at Markforged, and Cody Cochran, Basic Supervisor, Azoth, will clarify the end-to-end course of and essential gear, together with instruments to judge how binder jetting can speed up your personal enterprise. Attendees will learn the way flagship Markforged buyer Azoth, an engineering and manufacturing companies agency centered round superior manufacturing, makes use of binder jetting to provide verified components for purchasers in a number of industries, together with automotive.
“Metallic binder jetting is a production-scale additive expertise that permits producers to economically produce complicated steel components — at excessive quantity. Main producers throughout a variety of industries already leverage Markforged binder jetting options to provide thousands and thousands of precision steel elements. Be a part of us on April tenth to see how one can be a part of them.”
You may register for the webinar right here.
April 11: Broaden Your Data of ColdMetalFusion
At 11 am EST on Thursday, April eleventh, the ColdMetalFusion alliance will current “Navigate with Confidence: A complicated webinar for ColdMetalFusion.” That is ideally suited for individuals who’ve already discovered the fundamentals of ColdMetalFusion (CMF) and need to increase their data and experience as a way to maximize the advantages of the expertise. A number of matters might be coated throughout the webinar, together with half choice technique and a deep dive into design guidelines by taking a look at real-life purposes. There will even be an FAQ session.
“Take part in our interactive and superior webinar and discover ways to navigate the world of ColdMetalFusion with confidence – dive into the small print of choosing the appropriate half and study the design guidelines by real-life purposes.”
You may register for the webinar right here.
April 11: About MIT xPRO’s Additive Manufacturing Course
The Massachusetts Institute of Know-how gives on-line studying applications by way of MIT xPRO, and also you’ll have the prospect to study all about one among them this Thursday the eleventh, at 2 pm EST. The net certificates course “Additive Manufacturing for Progressive Design and Manufacturing” has been taken by hundreds of individuals because it was first launched. However throughout this week’s free, interactive webinar, “Inside MIT xPRO’s Additive Manufacturing On-line Course,” attendees will hear in regards to the construction, supply, and key studying aims of the certificates course, in addition to who ought to enroll, from AM trade chief John Hart, Professor of Mechanical Engineering and Director of the Laboratory for Manufacturing and Productiveness (LMP) and Heart for Additive and Digital Superior Manufacturing Applied sciences (APT) at MIT. Professor Hart will even talk about the historical past and purposes of AM throughout industries, and attendees can take part in a Q&A session on the finish.
“Hundreds of execs have joined MIT school and trade leaders for MIT xPRO’s Additive Manufacturing for Progressive Design and Manufacturing – an internet certificates course that gives learners the chance to apply AM processes and strategies with cutting-edge CAD and generative design instruments (CAD data not required), in addition to case research, assessments, and instruments.”
You may register for this particular occasion right here. This one is to not be missed!
Do you may have information to share about any future webinars or digital and dwell occasions? Please tell us!
[ad_2]
Supply hyperlink
